How to Find a Truck Driving School near Union Springs Alabama
Congrats on your decision to become a trucker and enroll in a trucking school near Union Springs AL. Perhaps it has always been your dream to hit the open highway while driving a big ole tractor trailer. Or possibly you have conducted some analysis and have discovered that a career as a truck driver provides good income and flexible job prospects. No matter what your reason is, it’s imperative to receive the appropriate training by selecting the right CDL school in your area. When assessing your options, there are various variables that you’ll need to examine before making your ultimate selection. Location will no doubt be important, especially if you need to commute from your Union Springs residence. The cost will also be important, but choosing a school based entirely on price is not the ideal way to ensure you’ll get the proper training. Just remember, your goal is to learn the skills and knowledge that will allow you to pass the CDL examinations and become a professional truck driver. So keeping that objective in mind, just how do you decide on a truck driving school? That is what we are going to cover in the balance of this article. But first, we are going to talk a little bit about which commercial driver’s license you will eventually need.
Which Commercial Drivers License Will You Need?
In order to operate commercial vehicles legally in Alabama and within the USA, an operator needs to get a CDL (Commercial Driver’s License). The three license classes that a driver can apply for are Class A, Class B and Class C. Since the subject of this article is how to choose a truck driving school near Union Springs AL, we will discuss Class A and B licenses. What distinguishes each class of CDL is the type of vehicle that the driver can operate together with the GVWR (Gross Vehicle Weight Rating) or GCWR (Gross Combination Weight Rating). Below are short explanations for the two classes.
Class A CDL. A Class A CDL is required to operate any vehicle that has a GCWR of more than 26,000 lbs., including a towed vehicle of more than 10,000 lbs. Some of the vehicles that operators may be able to drive with Class A licenses are:
- Interstate or Intrastate Tractor Trailers
- Trucks with Double or Triple Trailers
- Tanker Trucks
- Livestock Carriers
- Class B and Class C Vehicles
Class B CDL. A Class B Commercial Drivers License is required to operate single vehicles having a GVWR of greater than 26,000 lbs., or a GCWR of greater than 26,000 lbs. including a towed vehicle weighing up to 10,000 lbs. Some of the vehicles that drivers may be qualified to operate with Class B licenses are:
- Tractor Trailers
- Dump Trucks
- Cement Mixers
- Large Buses
- Class C Vehicles
Both Class A and Class B CDLs may also need endorsements to drive specific types of vehicles, for example school or passenger buses. And a Class A licensee, with the appropriate required endorsements, can operate any vehicle that a Class B licensee is authorized to drive.
How to Research a Truck Driving School
When you have decided which Commercial Drivers License you would like to pursue, you can start the undertaking of evaluating the Union Springs AL truck driver schools that you are looking at. As previously discussed, cost and location will undoubtedly be your initial considerations. But it can’t be emphasized enough that they should not be your sole concerns. Other factors, for instance the experience of the instructors or the reputations of the schools are equally if not more important. So below are several more things that you should research while conducting your due diligence prior to enrolling in, and particularly paying for, your truck driving training.
Are the Schools Accredited or Certified ? Not many Union Springs AL trucking schools are accredited because of the stringent process and expense to the schools. However, certification is more prevalent and is offered by the Professional Truck Driver Institute (PTDI). A school is not required to become certified, but there are a number of advantages. Interested students recognize that the training will be of the highest quality, and that they will receive plenty of driving time. As an example, PTDI calls for 44 hours of actual driving time, not ride-alongs or simulations. So if a school’s program is certified (the program, not the school is certified), students know that the curriculum and training will meet the very high benchmarks set by PTDI.
How Long in Business? One indicator to help evaluate the quality of a trucking school is how long it has been in business. A negatively reviewed or a fly by night school usually will not stay in business very long, so longevity is a plus. On the other hand, even the best of Union Springs AL schools had to start from their opening day of training, so use it as one of several qualifiers. You can also ask what the school’s track record is concerning successful licensing and job placement of its graduates. If a school won’t provide those numbers, search elsewhere. The schools should additionally maintain relationships with local and national trucking firms. Having numerous contacts not only confirms a quality reputation within the industry, but also boosts their job assistance program for students. It also wouldn’t hurt to get in touch with the Alabama licensing authority to verify that the CDL trucking schools you are considering are in good standing.
How Effective is the Training? As a minimum requirement, the schools must be licensed in Alabama and employ teachers that are experienced and trained. We will discuss more about the instructors in the next section. Also, the student to instructor proportion should not be greater than 4 to 1. If it’s any greater, then students will not be obtaining the personalized attention they will need. This is particularly true concerning the one-on-one instruction for behind the wheel training. And watch out for any school that claims it can teach you to be a truck driver in a comparatively short time frame. Training to be an operator and to drive a tractor trailer skillfully requires time. The majority of Union Springs AL schools offer training programs that range from three weeks to as long as two months, based on the class of license or type of vehicle.
How Good are the Teachers? As earlier stated, it’s important that the instructors are trained to teach driving methods and experienced as both instructors and drivers. Even though a number of states have minimum driving time criteria to be certified as an instructor, the more professional driving experience an instructor has the better. It’s also important that the instructors keep up to date with industry advancements or any new regulations or changes in existing laws. Evaluating instructors might be a bit more subjective than other standards, and possibly the best method is to visit the Union Springs AL school and talk to the instructors face to face. You can also talk to a few of the students going through the training and ask if they are happy with the quality of instruction and the teacher’s ability to train them.
Enough Driving Time? Above all else, a good trucking school will furnish lots of driving time to its students. After all, isn’t that what it’s all about? Driving time is the actual time spent behind the wheel operating a truck. Even though the use of ride-a-longs with other students and simulators are important training tools, they are no alternative for actual driving. The more training that a student receives behind the wheel, the better driver he or she will become. Although driving time differs between schools, a reasonable standard is 32 hours at a minimum. If the school is PTDI certified, it will furnish at least 44 hours of driving time. Check with the Union Springs AL schools you are looking at and ask how much driving time they provide.
Are they Captive or Independent ? It’s possible to receive free or discounted training from a number of Union Springs AL truck driver schools if you make a commitment to drive for a specified carrier for a defined amount of time. This is referred to as contract training, and the schools that offer it are called captives. So rather than having associations with numerous trucking lines that they can place their graduates with, captives only work with one company. The tradeoff is receiving free or less expensive training by giving up the freedom to initially be a driver wherever you choose. Clearly contract training has the potential to restrict your income opportunities when beginning your new career. But for some it may be the only way to get affordable training. Just make sure to inquire if the schools you are considering are independent or captive so that you can make an informed decision.
Is there Onsite CDL Testing? There are a number of states that will permit third party CDL testing onsite of truck driver schools for its grads. If onsite testing is permitted in Alabama, ask if the Union Springs AL schools you are looking at are DMV certified to provide it. One benefit is that it is more convenient than battling with graduates of competing schools for test times at Alabama testing facilities. It is moreover an indication that the DMV deems the authorized schools to be of a higher quality.
Are the Class Times Accessible? As previously noted, CDL training is just 1 to 2 months long. With such a short duration, it’s important that the Union Springs AL school you choose provides flexibility for both the curriculum and the scheduling of classes. For example, if you’re having difficulty learning a particular driving maneuver, then the instructor should be prepared to dedicate more time with you until you are proficient. And if you’re still working while attending training, then the class scheduling must be flexible enough to fit in working hours or other obligations.
Is Job Placement Provided? As soon as you have attained your CDL license after graduating from truck driving school, you will be keen to begin your new career in Union Springs AL. Verify that the schools you are considering have job assistance programs. Ask what their job placement ratio is and what average salary their grads start at. Also, ask which local and national trucking firms their graduates are referred to for hiring. If a school has a low job placement rate or not many employers recruiting their grads, it may be a sign to search elsewhere.
Is Financial Aid Available? Trucking schools are comparable to colleges and other trade or technical schools when it comes to loans and other forms of financial aid being available. Ask if the schools you are examining have a financial assistance department, or at least someone who can help you understand the options and forms that need to be completed in Union Springs AL.
Why Did You Desire to Become a Tractor Trailer Operator?When getting ready to interview for a Trucking position, it's helpful to consider questions you might be asked. Among the things that interviewers typically ask truck driving applicants is "What drove you to decide on trucking as a career?". What the interviewer is attempting to uncover is not just the private reasons you may have for being a truck driver, but also what attributes and talents you have that make you outstanding at what you do. You will probably be asked questions relating primarily to trucking, as well as a significant number of standard interview questions, so you need to ready several strategies about how you want to address them. Because there are several variables that go into selecting a career, you can respond to this fundamental question in a multitude of ways. When formulating an answer, aim to include the reasons the profession interests you in addition to the strengths you have that make you an outstanding truck driver and the ideal candidate for the job. Don't attempt to memorize an answer, but jot down some concepts and topics that relate to your personal experiences and strengths. Reading through sample answers can help you to formulate your own concepts, and provide ideas of what to include to wow the interviewer.
Pick the Best Truck Driving School Union Springs AL
Choosing the ideal truck driver school is a critical first step to beginning your new vocation as a long distance or local truck driver. The skills taught at school will be those that shape a new career behind the wheel. There are many options available and understanding them is crucial if you are going to succeed as an operator. Most importantly, you must receive the appropriate training in order to drive a large commercial vehicle in a safe and professional fashion. If you are lacking money or financing, you may want to look into a captive school. You will pay a reduced or in some cases no tuition by agreeing to drive for their contracted carrier. Or you can select an independent school and have the the freedom to drive for the trucking company of your choosing, or one of several affiliated with the school. It’s your choice. But regardless of how you get your training, you will soon be entering an industry that helps our country move as a professional truck driver in Union Springs AL.
A Bit About Union Springs Alabama
Union Springs, Alabama
The area that became Union Springs was first settled by white men after the Creek Indian removal of the 1830s. Twenty-seven springs watered the land, giving rise to the name of Union Springs. The city was incorporated on January 13, 1844. When Bullock County was formed in 1866, voters selected Union Springs as the county seat.
Union Springs is located in southeastern Alabama near the center of Bullock County at 32°8'24.407" North, 85°42'46.094" West (32.140113, -85.712804). The source of the Conecuh River is within the city limits.
The city is located at the intersection of U.S. Route 82 and U.S. Route 29. Route 82 leads east 40 miles (64 km) to Eufaula and northwest 46 miles (74 km) to Montgomery, the state capital. Route 29 leads north 23 miles (37 km) to Tuskegee and southwest 40 miles (64 km) to Troy.
According to the U.S. Census Bureau, Union Springs has a total area of 6.7 square miles (17.3 km2), of which 6.6 square miles (17.2 km2) is land and 0.077 square miles (0.2 km2), or 0.93%, is water.
More Cities of Interest in Alabama